After reading this article, I have an instant understanding of the soft capsule filling machine

The soft capsule filling machine has complete functions. The hopper buzzes and alarms when there is no material. It automatically stops when the empty capsule is not enough. The filling function of pellets, granules and tablets can be installed according to user requirements. It can meet 3 kinds of materials and meet the requirements of slow release, controlled release and tablets. The demand for medicines in the same capsule. A sealing device is embedded in the bottom of the metering plate of the soft capsule filling machine to improve powder leakage, reduce mechanical wear, and make it easier to clean. There are barriers around the dose plate, which can effectively recover the powder thrown from the lower plane of the dose plate through the pipeline. Reuse, while reducing dust on the work surface.
 

The soft capsule filling machine through pre-processing comprehensive ingredients, adding pure water, solid granular medical bone glue, additives, vitamins, glycerin, etc. in a certain proportion, and stirring the glue after a low temperature cycle of 70 to 80 ℃, and vacuuming the glue after a period of time. After the bubbles and certain water in the glue are removed, put the glue in the gelatin bucket and let the glue that has been left for a period of time pass through the soft capsule filling machine to heat the gelatin box, and then set the main machine roller mold to cool it into Solid state. The solid rubber skin is then passed through the left and right molds on the machine head, and the medicine is injected into the rubber skin from the spray body, and the finished product pellets are sent to the drying system by the conveyor to the drying system for low-temperature drying.
 

　　 But it has shortcomings, mainly reflected in its drying system:
 

From the point of view of the structure of the equipment, the drying system of the soft capsule filling machine is designed according to the manual rotary ordinary drying equipment. The method used is manual drying. In general, this method is difficult to achieve the initial shape of the soft capsule Requirements. Because the speed of the dryer during operation is difficult to adjust, and it cannot be turned over regularly, it is often out.